| DS-510 HELP |
|
|
 |
|
Status |
Network Settings |
Extended Settings |
System Information |
|
| |
| Status |
-TOP- |
| USB Device |
Display a USB device name this product can detect when connected from the USB device.
When a USB device name can not be detected, it will be displayed as ProductID(PID[0xXXXX]). |
| Manufacturer Name |
Display a manufacturer name this product can detect when connected from the USB device.
When a manufacturer name can not be detected, it will be displayed as VendorID(VID[0xXXXX]). |
| USB Speed |
Display the bus data transfer rate of the USB device connected to this product. (Hi-Speed, Full Speed, Low Speed) |
| Connected PC |
Display the IP address of the PC(host) the networked USB device is connected to. When the USB device is not connected to a PC, "Not Connected" will be displayed. |
| Duration (H:M:SEC) |
Display the duration of time the USB device is connected to a PC. |
| Printer Name |
Display a device name this product can detect when connected from the printer device.
When a USB device name can not be detected, it will be displayed as ProductID(PID[0xXXXX]). |
| Raw Port No. |
Display the destination TCP port number used when conducting raw mode print with this printer. |
| Queue Name |
Display the destination queue used when performing LPR print with this printer. |
| IPP destination URL |
Display the destination URL for the IPP print with this printer. |
| Host Name |
Display the HostName of this product. |
| IP Address |
Display the IP address of this product. |
| Subnet Mask |
Display the subnet mask of this product. |
| Default Gateway |
Display the default gateway of this product. |
| DHCP/BOOTP Server |
Display the IP address of a DHCP/BOOTP server when an IP address of this product is assigned by the DHCP/BOOTP server. |
| Lease Time(sec.) |
Display the lease time when an IP address of this product is assigned by the DHCP/BOOTP server. |
| mDNS Service Name |
Display the current mDNS Service Name of this product. |
| mDNS Domain Name |
Display the current mDNS Domain Name of this product. |
| LAN Interface |
Display the Link status of this product. |
| Primary WINS Server |
Display the IP address of a WINS Primary Server of this product. |
| Secondary WINS Server |
Display the IP address of a WINS Secondary Server of this product. |
| NetBIOS Scope ID |
Display the Scope ID of this product. |
| |
| Network Settings |
-TOP- |
| LAN Interface |
Configure the physical network type. "AUTO" is recommended. If the Link LED on the hub is not turned on when you turn on this product, change the network type to the network type of the hub. |
| Host Name |
Configure the Host Name on this product. The name set here is used with WINS and Utility, etc. The name must be different from those of other device. |
| DHCP/BOOTP |
Enable/Disable the function to get IP address from the DHCP/BOOTP server when this product is turned on.
(ENABLE:enable the function DISABLE:disable the function)
To get the IP address of this product from the DHCP/BOOTP server, the DHCP/BOOTP server with the appropriate configuration must be running in the subnetwork. This product detects DHCP and BOOTP automatically. If more than 1 address gets returned, the IP address which is returned first will be assigned. |
| IP Address |
Configure the IP address on this product. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". |
| Subnet Mask |
Configure the subnet mask on this product. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". If the value is "0.0.0.0", the subnet mask corresponding to the IP address will be assigned automatically. |
| Default Gateway |
Configure the gateway IP address on this product. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". The gateway must be in the network where this product exists. If the value is "0.0.0.0", this setting is disabled. |
| Network PnP |
Enable/Disable Network PnP function.
(ENABLE:enable the function DISABLE:disable the function) |
| mDNS |
Enable/Disable mDNS function(Apple Bonjour function).
(ENABLE:enable the function DISABLE:disable the function) |
| mDNS Service Name |
Configure the mDNS Service Name of this product. This name is displayed when the product is searched in the network using the Apple Bonjour function. The name must be unique within the network. |
| Primary WINS Server |
Assign the WINS server's address (primary). WINS server will resolve the IP address from the host name. Therefore you can use a hostname instead of the IP address when communicating via TCP/IP. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". |
| Secondary WINS Server |
Assign the WINS server's address (secondary). WINS server will resolve the IP address from the host name. Therefore you can use a hostname instead of the IP address when communicating via TCP/IP. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". |
| NetBIOS Scope ID |
The scope ID defines the computer group that recognized the registered host name. All computers which has the same scope ID can recognize each other. |
| IP Filter Mode |
Configure the IP filter operations. Available options are "ALLOW" and "DENY". If you select "ALLOW", only the data from the configured IP address range can be accepted. If you select "DENY", the data from the configured IP address range cannot be received. |
Start Address
(Filter#0-#3) |
Configure the start address of the IP filter. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". |
End Address
(Filter#0-#3) |
Configure the end address of the IP filter. The value must be configured in the format of a four-part series of numbers separated by decimal points, such as "xxx.xxx.xxx.xxx". |
| FTP |
Enable/Disable access to this product using FTP.
If ENABLE is selected, access to this product is allowed, and if DISABLE is selected, it is denied. |
| Telnet |
Enable/Disable access to this product using Telnet.
If ENABLE is selected, access to this product is allowed, and if DISABLE is selected, it is denied. |
| HTTP |
Enable/Disable access to this product using HTTP.
If ENABLE is selected, access to this product is allowed, and if DISABLE is selected, it is denied. |
| Print Server |
Enable/Disable access to this product when the print server feature is used.
If ENABLE is selected, access to this product is allowed, and if DISABLE is selected, it is denied. |
| Device Server |
Enable/Disable access to this product when the device server feature is used.
If ENABLE is selected, access to this product is allowed, and if DISABLE is selected, it is denied. |
| |
| Extended Settings |
-TOP- |
| ECO Mode |
If this product is idle for the specified amount of time, it will automatically switch into ECO mode. When the USB device connection utility is started or this product is accessed for a particular purpose, this product will automatically wake up from ECO mode. |
| ECO Mode Shift Time(minutes) |
Specify the amount of time until this product switches into ECO mode, when the ECO mode setting is enabled (min). |
| |
| System Information |
-TOP- |
| MAC Address |
Display the MAC address of this product. |
| Firmware Version |
Display the firmware version of this product. |
| URL | Jump to Global Site of silex technology, Inc.
You can view FAQ and get latest software from silex technology's Web site. |
| New Password |
Configure the administrator password in ASCII characters (up to 7 characters). This is used as the authentication password for configuration changes via the Web page. |
| Re-enter New Password |
Re-enter the new password. |
| Reboot |
Reboot this product by clicking Start. |
| Reset to Factory Default |
Reset this product to factory default settings, and reboot by clicking Start. |
| Time |
Display the time when a PC is connected to or disconnected from a networked USB device. The time displayed will be the elapsed time since this product is turned on. |
| Event |
Display the PC event history. (Connect/Disconnect) |
| USB Device |
Display the USB device that is used. |
| Connected PC |
Display the IP address of a PC that is connected to a USB device. |